Connect to Student Printer

Mac

How to add the 1st floor Ricoh Printer to a Mac computer

  1. Go to https://www.ricoh-usa.com/en/support-and-download
  2. Search for “MP 2555”, then select “Drivers”.

  3. Download the first Printer Driver it suggests. This will typically be a PPD Installer.

  4. Open the .DMG it downloads and double click the .PKG inside.
  5. Continue through the installer to install the driver.
  6. Go to your System Preferences and choose Printers & Scanners.
  7. Click the + button to add a printer.
  8. To add the Ricoh Printer – Under the IP tab, fill in as illustrated below.
    • Address: 10.23.64.29
    • Protocol: Line Printer Daemon – LPD
    • Name: Whatever name you like
    • Use: Select Software…
      • Filter and select “RICOH MP 2555 PS”
  9. Select Add. Now the printer should be ready to use.

Windows

How to add the 1st floor Ricoh Printer to a Windows computer

  1. On your keyboard, hold the Windows Key then press “R”. This should bring up the Run window.
  2. You will be prompted for your FSU username and password. Make sure you type “FSU\” before your student username. Select “Remember my credentials” then click OK.

  3. From the list of printers, right-click on “CMPA-UCA-1103-RICOH-2555” and select “Connect…”

  4. Confirm the prompts for installing the printer. Now the printer should be ready to use.